|
|
|
The air handling unit will be a
double skin air handling unit with
cooling compressor and cooling coils,
Filters – 20, 10 & 5 micron
/ HEPA filters – 0.3 micron,
Air dampers, G.I. Ducting, Supply
Air and return Air grills, etc.,
|
|
|
|
|
Clean room door is made of pre-coated
double skin ‘PUF’ filled
or CRCA / G.I. ‘PUF’
filled with hinges and door handles.
View glass window are also provided.
|
|
|
|
|
Air
shower equipment is positioned in
anti-room areas to remove dust particles
generated through personnel movement
by accelerating high velocity filtered
air to blast through nozzles. Unit
consists of Centrifugal Blower,
HEPA filter, PRE filter, Air flow
jet Nozzle, Aluminium door with
glass, interlock system for door,
Electrical controls and vinyl flooring.
MODEL
NO. |
Working
area(L x D x H) |
TAS
336 |
900
x 900 x 1800 |
TAS
366 |
900
x 1800 x 1800 |
|
|
|
|
|
The double glazed viewing panel
provides a flush finish to the clean
room facility and is available in
number of standard sizes. The outer
flange provides a seal to wall finish
and is complete with silicon sealing
and silica gel.
|
|
|
|
|
The air curtain maintains the interior
air conditioning efficiency to save
energy, while preventing entry of
dust, harmful insects and fumes
from outside. Automatic switch for
operating when opening / closing
of door.
MODEL
NO. |
Working
area(L x D x H) |
TAC
6 |
600
x 225 x 225 mm |
TAC
9 |
900
x 225 x 225 mm |
TAC
12 |
1200
x 250 x 250 mm |
|
|
|
|
|
Sterile air tent
is provided to protect the surrounding
from contamination. It is used in
specified areas where the manufacturing
and process activity is taking place.
The product is custom built.
It consists of clean air modules
kept on a supporting stand, which
is covered by plastic curtains all
around. The worktables or any required
machinery can be kept inside these
portable clean rooms. The system
is without air-cooling.
Material
of construction
Electro-galvanised (G.I) sheet metal.
CRCA sheet with powder coat finish.
Wooden with lamination
Stainless steel.
MODEL
NO. |
Working
area(L x D x H) |
TST
64 |
1800
x 1200 x 2100 mm |
TST
84 |
2400
x 1200 x 2100 mm |
|
|
|
|
POSITIVE
PRESSURE MODULES |
|
|
The positive pressure modules are
designed to provide a clean area
within a small enclosure. The modules
pass filtered air with light positive
pressure into the room such that
whenever the room door is opened,
the room air is forced out to prevent
any contamination entering the room.
These are light weight compact in
size. These design adopt the same
principle of Laminar flow. Easy
to install, maintenance free. Suitable
for operation theatre, Research
Lab and Biotechnology lab, etc.,
MODEL
NO. |
Air
Volume |
TPPM
500 |
500
cfm |
TPPM
1000 |
1000
cfm |
|
|
|
|
|
The pass box is an enclosure normally
installed on the wall between the
clean room and any other rooms.
It is used for transfer of material
into the clean room, without contaminating
the air of the clean room. This
is achieved with the help of double
doors of the pass box.
MODEL
NO. |
Working
area |
TPB
1812 |
300
x 300 x 300 mm |
TPB
2418 |
450
x 450 x 450 mm |
|
|
|
|
|
Garment storage
cabinet is a self-standing, down
flow clean air to clean room garments.
Recommended in change rooms. Suitable
for pharmaceutical, hospital and
O/T, Electronic industry and clean
room area, etc.,
A HEPA filter
blower system provides a constant
air wash of the hanging garments.
Up to 30 garments can be stored
comfortably on the PVC hanger bar.
The cabinet is available in the
standard size of 3 ft. and 4 ft.
or special sizes on request.
|
|
|
|