The Laminar Air Flow Cabinet is a standard air flow model used in most laboratories. It provides only product safety and not user or environmental safety. The area of work table will be under Class 100 clean air working condition and the cabinet air will be vented / exhausted out through the front opening.

 

 

MATERIAL OF CONSTRUCTION

Electro-galvanised (G.I) sheet metal with powder coat finish.
CRCA sheet with powder coat finish
Water proof plywood with lamination
Stainless steel.
MDF board with lamination

Unit consists of HEPA Filter, PRE Filter, Blower Assembly, S.S. Table top, U.V. Lamp, Transparent Front Door, Manometer, Gascock, Side View Glass Panel, Castor Wheel and Level Jack.

TECHNICAL SPECIFICATION

Cleanliness : Class 100
Particle retention : 0.3 micron & above
Velocity : 90 ± 20%
Standard : US Federal Standard 209 E
Noise level : 65 db ± 5%
Illumination : 750 to 800 lumen.
Power supply : 220 V single phase 50 cycle.

APPLICATION

Laminar flow cabinet configuration finds extensive application in Scientific, Medical and Pharmacies. Ideal for Microbiology, Biotechnology, Research work for Institution and Semi Conductor Industry for performing R & D or sterile work under clean working condition.

Horizontal Laminar Flow Cabinet direct the air through PRE filter at the bottom level of the cabinet and the air flows horizontally through HEPA filter towards the work area. Again the air is discharged back to the room. Thus horizontal laminar flow cabinet provides only product protection.

 

 

Floor Standing Model	Table Top Model	Working area
THFS 222	THTT 222	2’ x 2’ x 2’
THFS 322	THTT 322	3’ x 2’ x 2’
THFS 422	THTT 422	4’ x 2’ x 2’
THFS 622	THTT 622	6’ x 2’ x 2’

 

Vertical Laminar Airflow directs the air through PRE filter from top / bottom level of cabinet and the air flows vertical down flow through HEPA filter towards the work area. Again the air is discharged back to the room. Thus vertical laminar flow cabinet provides only product protection.

 

 

Floor Standing Model	Table Top Model	Working area
TVFS 222	TVTT 222	2’ x 2’ x 2’
TVFS 322	TVTT 322	3’ x 2’ x 2’
TVFS 422	TVTT 422	4’ x 2’ x 2’
TVFS 622	TVTT 622	6’ x 2’ x 2’

 

In Vertical Laminar Flow Cabinet, an additional Exhaust System is provided to exhaust the contaminated air out.

 

MODEL NO.	Working area(L x D x H)
TVES 222	2’ x 2’ x 2’
TVES 322	3’ x 2’ x 2’
TVES 422	4’ x 2’ x 2’
TVES 622	6’ x 2’ x 2’