|
|
|
|
BIO
SAFETY CABINET - CLASS I |
|
The
Bio Safety Cabinet is a safer version
of the Laminar Air Flow Cabinet.
Here 100% air is exhausted through
HEPA filter to the outside or into
the room. Provides only user and
environmental safety and not product
safety.
MATERIAL
OF CONSTRUCTION
Electro – galvanised (G.I)
sheet metal with powder coat finish
CRCA sheet with powder coat finish
Water proof plywood with lamination
Fully Stainless steel
TECHNICAL
SPECIFICATION
Cleanliness : Class
100
Particle retention : 0.3 micron
& above
Filter Face Velocity : 90 ±
20 FPM
Standard : US Federal Standard 209
E
Noise Level : 65 dB ± 5 %
Illumination : 750 to 800 lumen
Power supply : 220 v single phase
50 cycle
APPLICATION
Most suitable
for bacteriological, toxicology,
where the presence of highly air
borne particles, bacteria and viral
need to be controlled to provide
clean working condition.
MODEL
NO. |
Working
area(L x D x H) |
TBS
– 1 322 |
3’
x 2’ x 2’ |
TBS
– 1 422 |
4’
x 2’ x 2’ |
TBS
– 1 622 |
6’
x 2’ x 2’ |
|
|
|
|
BIO SAFETY CABINET – CLASS
II, TYPE A1 |
|
|
This
Bio Safety Cabinet is a safer version
of the Laminar Air Flow Cabinet.
Here, 70% of air is re-circulated
and 30% air is exhausted through
a Blower at bottom of cabinet with
+ve pressure in plenum at the back
side. Provides product, environment
and user safety.
MATERIAL
OF CONSTRUCTION
Electro – galvanised (G.I)
sheet metal with powder coat finish
CRCA sheet with powder coat finish
Water proof plywood with lamination
Fully Stainless steel
TECHNICAL
SPECIFICATION
Cleanliness : Class
100
Particle retention : 0.3 micron
& above
Filter Face Velocity : 90 ±
20 FPM
Standard : US Federal Standard 209
E
Noise Level : 65 dB ± 5 %
Illumination : 750 to 800 lumen
Power supply : 220 v single phase
50 cycle
APPLICATION
Most suitable
for bacteriological, toxicology,
where the presence of highly air
borne particles, bacteria and viral
need to be controlled to provide
clean working condition.
MODEL
NO. |
Working
area(L x D x H) |
TBS-II
/ A 1 322 |
3’
x 2’ x 2’ |
TBS-II
/ A 1 422 |
4’
x 2’ x 2’ |
TBS-II
/ A 1 622 |
6’
x 2’ x 2’ |
|
|
|
|
BIO
SAFETY CABINET – CLASS
II, TYPE A2 |
|
|
This
Bio Safety Cabinet is a safer version
of the Laminar Air Flow Cabinet
. Here, 70% Re-Circulation and 30%
Exhaust of air is created. The Blower
is placed on top of the cabinet
with -ve pressure in plenum on the
back side. Provides product, environment
and user safety.
MATERIAL
OF CONSTRUCTION
Electro – galvanised (G.I)
sheet metal with powder coat finish
CRCA sheet with powder coat finish
Water proof plywood with lamination
Fully Stainless steel
TECHNICAL
SPECIFICATION
Cleanliness : Class
100
Particle retention : 0.3 micron
& above
Filter Face Velocity : 90 ±
20 FPM
Standard : US Federal Standard 209
E
Noise Level : 65 dB ± 5 %
Illumination : 750 to 800 lumen
Power supply : 220 v single phase
50 cycle
APPLICATION
Most suitable
for bacteriological, toxicology,
where the presence of highly air
borne particles, bacteria and viral
need to be controlled to provide
clean working condition
MODEL
NO. |
Working
area(L x D x H) |
TBS-II
/ A 2 322 |
3’
x 2’ x 2’ |
TBS-II
/ A 2 422 |
4’
x 2’ x 2’ |
TBS-II
/ A 2 622 |
6’
x 2’ x 2’ |
|
|
|
|
BIO
SAFETY CABINET – CLASS
II, TYPE B1 |
|
|
This
Bio Safety Cabinet is a safer version
of the Laminar Air Flow Cabinet
. Here, 30% Re-Circulation and 70%
Exhaust of air is created. The Blower
is positioned at bottom of cabinet
with -ve pressure in plenum on both
sides. Contaminated air will be
filtered through HEPA, one at bottom
and two on top. Provides product,
environment and user safety.
MATERIAL
OF CONSTRUCTION
Electro – galvanised (G.I)
sheet metal with powder coat finish
CRCA sheet with powder coat finish
Water proof plywood with lamination
Fully Stainless steel
TECHNICAL
SPECIFICATION
Cleanliness : Class
100
Particle retention : 0.3 micron
& above
Filter Face Velocity : 90 ±
20 FPM
Standard : US Federal Standard 209
E
Noise Level : 65 dB ± 5 %
Illumination : 750 to 800 lumen
Power supply : 220 v single phase
50 cycle
APPLICATION
Most suitable
for bacteriological, toxicology,
where the presence of highly air
borne particles, bacteria and viral
need to be controlled to provide
clean working condition.
MODEL
NO. |
Working
area(L x D x H) |
TBS-II
/ B 1 322 |
3’
x 2’ x 2’ |
TBS-II
/ B 1 422 |
4’
x 2’ x 2’ |
TBS-II
/ B 1 622 |
6’
x 2’ x 2’ |
|
|
|
|
BIO
SAFETY CABINET – CLASS
II, TYPE B2 |
|
|
This
Bio Safety Cabinet is a Full 100%
Exhaust version with –ve pressure
in back plenum with blower on top
for exhaust. Provides product, environment
and user safety.
MATERIAL
OF CONSTRUCTION
Electro – galvanised (G.I)
sheet metal with powder coat finish
CRCA sheet with powder coat finish
Water proof plywood with lamination
Fully Stainless steel
TECHNICAL
SPECIFICATION
Cleanliness : Class
100
Particle retention : 0.3 micron
& above
Filter Face Velocity : 90 ±
20 FPM
Standard : US Federal Standard 209
E
Noise Level : 65 dB ± 5 %
Illumination : 750 to 800 lumen
Power supply : 220 v single phase
50 cycle
APPLICATION
Most suitable
for bacteriological, toxicology,
where the presence of highly air
borne particles, bacteria and viral
need to be controlled to provide
clean working condition.
MODEL
NO. |
Working
area(L x D x H) |
TBS-II
/ B 2 322 |
3’
x 2’ x 2’ |
TBS-II
/ B 2 422 |
4’
x 2’ x 2’ |
TBS-II
/ B 2 622 |
6’
x 2’ x 2’ |
|
|
|
|
BIO
SAFETY CABINET – CLASS
III |
|
|
This
Bio Safety Cabinet is a Full 100%
Exhaust version with –ve pressure
in back plenum with blower on top
for exhaust. Provides product, environment
and user safety.
MATERIAL
OF CONSTRUCTION
Electro – galvanised (G.I)
sheet metal with powder coat finish
CRCA sheet with powder coat finish
Water proof plywood with lamination
Fully Stainless steel
TECHNICAL
SPECIFICATION
Cleanliness : Class
100
Particle retention : 0.3 micron
& above
Filter Face Velocity : 90 ±
20 FPM
Standard : US Federal Standard 209
E
Noise Level : 65 dB ± 5 %
Illumination : 750 to 800 lumen
Power supply : 220 v single phase
50 cycle
APPLICATION
Most suitable
for bacteriological, toxicology,
where the presence of highly air
borne particles, bacteria and viral
need to be controlled to provide
clean working condition.
MODEL
NO. |
Working
area(L x D x H) |
TBS-III
322 |
3’
x 2’ x 2’ |
TBS-III
422 |
4’
x 2’ x 2’ |
TBS-III
622 |
6’
x 2’ x 2’ |
|
|
|
|
|
|
|