‘TECHNICO’ Laboratory tables are modular type. The modules will be designed in such a way that the modules can be dismantled very easily in case of maintenance if required. The under storage modules will be independent and entire load on the work surface will be sustained by the basic frame and not on the storage modules. Under bench storage modules will have drawer and bottom cupboard and front open shutter. The drawer and cupboards will have necessary locking arrangements. Components to be powder coated is pre-treated using seven tank processor, to ensure that the substrate is clean and free from grease, rust. Powder coating thickness is 50-60 micron. Powder coating is epoxy type.

MATERIAL OF CONSTRUCTION

Electro-galvanised (G.I) sheet metal with powder coat finish.
CRCA Sheet with powder coat finish.
Wooden with lamination.
Stainless steel.

Each module size of 900 mm or 600 mm or 450 mm can be offered based on requirement and room size / layout. Table length can be in multiple of the above module length. Standard working height will be 900 mm / 750 mm with normal width of 750 mm. Standard colours of orchid blue with ivory, white with black or any other combination can be offered.

Choice of tabletop depending on the nature of work.
Melamine Laminate
Granite stone
Ceramic glazed tiles
FRP
Stainless Steel.
Acid Proof tiles

TECHNICAL SPECIFICATION

Table size and colour as per the customer requirement. Custom tables to meet customers / work area requirement can be offered.
Generally Ivory ( Major ) and Orchid Blue (Minor)

Option
Without Knee hole.
With alternate Knee hole.
Bottom Cladding
Power Point Channel
Sink with Swan neck Tap